ABSTRACT
Most larvae of bony fish are able to swim almost immediately after hatching. Their locomotory system supports several vital functions: fish larvae make fast manoeuvres to escape from predators, aim accurately during suction feeding and may migrate towards suitable future habitats. Owing to their small size and low swimming speed, larval fish operate in the intermediate hydrodynamic regime, which connects the viscous and inertial flow regimes. They experience relatively strong viscous effects at low swimming speeds, and relatively strong inertial effects at their highest speeds. As the larvae grow and increase swimming speed, a shift occurs towards the inertial flow regime. To compensate for size-related limitations on swimming speed, fish larvae exploit high tail beat frequencies at their highest speeds, made possible by their low body inertia and fast neuromuscular system. The shifts in flow regime and body inertia lead to changing functional demands on the locomotory system during larval growth. To reach the reproductive adult stage, the developing larvae need to adjust to and perform the functions necessary for survival. Just after hatching, many fish larvae rely on yolk and need to develop their feeding systems before the yolk is exhausted. Furthermore, the larvae need to develop and continuously adjust their sensory, neural and muscular systems to catch prey and avoid predation. This Review discusses the hydrodynamics of swimming in the intermediate flow regime, the changing functional demands on the locomotory system of the growing and developing larval fish, and the solutions that have evolved to accommodate these demands.
Introduction
After hatching from the egg, most bony fish continue life as a larva, a few millimetres in length, that needs to survive autonomously. They have to hunt prey to gather resources for their growth and development, disperse, and escape from predators. This requires the larvae to swim effectively almost immediately after hatching. They generally use an undulatory swimming style (see Glossary), characterised by caudally directed waves of lateral bending of their body and tail. As the fish grow from larvae into juveniles, functional demands on the locomotory system change, requiring larval fish to adapt their locomotory system continuously to these varying requirements.
- A
peak-to-peak tail-beat amplitude
- CFD
computational fluid dynamics
- CoM
centre of mass
- CoT
cost of transport
cycle-averaged drag
- dpf
days post-fertilisation
- f
tail beat frequency
- l
body length
cycle-averaged input power
cycle-averaged output power
- PIV
particle image velocimetry
- PTV
particle tracking velocimetry
- Re
Reynolds number
- SR
sarcoplasmic reticulum
- St
Strouhal number
cycle-averaged thrust
cycle-averaged swimming speed
- η
Froude efficiency
- μ
dynamic viscosity
- ν
kinematic viscosity
- ρ
density of water
Anguilliform
Swimming mode in which undulations occur along a large part of the body.
Carangiform
Swimming mode in which undulations occur mainly near the tail.
Finfold
Larval fin structure surrounding almost the complete body behind the head.
Inertia
Resistance to changes in velocity.
Inertial flow regime
Hydrodynamic regime where inertia dominates; Re≳2000.
Intermediate flow regime
Hydrodynamic regime where both inertia and viscosity are important; 1≲Re≲2000.
Labriform
Swimming mode in which mainly the pectoral fins are used for propulsion.
Lateral line
Sensory organ for flow detection.
Particle image velocimetry (PIV)
Velocity measurement technique based on cross-correlation of particle images.
Particle tracking velocimetry (PTV)
Velocity measurement technique based on tracking of particles in video frames.
Reynolds number (Re)
Ratio between inertial and viscous forces in a fluid (dimensionless number).
Strouhal number (St)
Ratio between average lateral tail speed and forward swimming speed (dimensionless number).
Subcarangiform
Swimming mode between anguilliform and carangiform.
Thunniform
Swimming mode in which undulations are confined mostly to the tail.
Undulatory
Using waves of curvature along the body.
Viscosity
Resistance of a fluid to deform under stress.
Viscous flow regime
Hydrodynamic regime where viscosity dominates; Re≲1.
where ρ is fluid density, is mean swimming speed, l is body length, μ is dynamic viscosity and ν is kinematic viscosity (see Glossary). The Reynolds number expresses the ratio of contributions of inertial and viscous forces to a fluid-dynamic phenomenon, which is crucial to its dynamics. Viscosity is associated with friction between fluid particles, and inertia (see Glossary) is the tendency of mass to keep the same velocity in the absence of external forces. Very low Re values (Re≪1) are associated with the viscous flow regime (see Glossary), where inertia can be ignored. Much larger Re values (Re≳2000) indicate that inertia dominates. In the intermediate flow regime (1≲Re≲2000) (see Glossary), there is a gradual transition from viscosity-dominated flow at Re≈1 to inertia-dominated flow at Re≈2000.
Small fish larvae (l≲5 mm) operate in the intermediate flow regime over most of their range of swimming speeds, whereas larger fish larvae enter the inertial regime (see Glossary) at their highest swimming speeds (e.g. Fuiman and Webb, 1988; Müller and Van Leeuwen, 2004). In the intermediate flow regime, fish larvae have to deal with relatively strong viscous effects at low swimming speeds, whereas, at their highest speeds, inertial effects come to dominate. The changing hydrodynamic circumstances affect the production of fluid-dynamic forces. Hence, demands on the locomotory system change with swimming speed. Because the larvae need to swim throughout a range of speeds, they cannot adapt to a specific hydrodynamic regime and thus need to compromise in morphology, physiology and muscle control to accommodate the varying functional demands.
Bony fish larvae change shape considerably over development (Fig. 1), but the morphology of early larval stages of most species is surprisingly similar. When the larvae hatch, they have an elongated body surrounded by a continuous finfold (see Glossary) behind the head and yolk sac (Kendall et al., 1984). These similarities might indicate adaptations to common developmental constraints and/or common problems in locomotion, feeding and respiration. As the larvae grow and develop into juveniles, the body shapes of the different species diverge to prepare them for their adult lifestyle and swimming styles. For example, flatfish such as halibut change from a yolk-sac-bearing larva to a pelagic suction feeder to an asymmetric benthic flatfish (Fig. 1B) (Osse and Van den Boogaart, 1997). In addition to the changing hydrodynamic regime, these changes over the life history of the fish also result in changing functional demands.
This Review addresses the locomotory challenges that larval fish have to cope with, as well as the evolved solutions to the associated functional demands. We discuss the kinematics, fluid dynamics and energetics of swimming, and how the muscles of fish larvae are adapted to power swimming in the intermediate flow regime. Furthermore, we examine the functions supported by the locomotory system and how fish larvae have adapted to the demands derived from these functions (see Fig. 2 for an overview). Cruising is essential for many fish larvae, to disperse or to avoid dispersal caused by environmental flow (discussed in the section Cruising and dispersal). An important factor for survival is escape from predators, requiring the locomotory system to respond quickly and accelerate the fish strongly (discussed in the section Escaping predators). Fish larvae need to swim to find and hunt prey after they exhaust their yolk, which requires accurate control to aim their strikes (discussed in the section Hunting and feeding). Swimming also supports respiration by renewing the diffusive boundary layer of gases and ions (e.g. Green et al., 2011), and helps to maintain and control body orientation (e.g. Ehrlich and Schoppik, 2017); for reasons of space, we do not discuss these two functions. Finally, we provide perspectives for possible future research.
Body kinematics
Swimming kinematics are produced by a complex interaction between internal body mechanics and fluid mechanics (e.g. McMillen and Holmes, 2006; Tytell et al., 2010). The muscle system of the fish generates forces that cause body deformations. The resulting motion produces a flow field in the surrounding water, creating a fluid-dynamic force distribution on the skin. In turn, these forces change the loading on the fish, and with it the deformation of the body. Again, this deformation couples back to the fluid forces, creating a loop of interactions between the water and the body of the fish. These mechanical interactions determine the changes in body shape and motion of the fish through the water.
To study these complex interactions, swimming kinematics (i.e. body shape, position and orientation) need to be determined in detail. Historically, this has been performed mostly by tracking the two-dimensional (2D) movements of the body centreline and centre of mass (CoM) in a horizontal plane from a single, vertically oriented movie camera (e.g. Fig. 3A; Müller and Van Leeuwen, 2004), but recently more sophisticated multi-camera three-dimensional (3D) tracking systems have been developed (e.g. Butail and Paley, 2012; Voesenek et al., 2016). Results from these new trackers show that swimming motions that appear 2D in a single (bottom or top) camera view often have a large vertical component. For example, a fast-starting larval zebrafish [5 days post-fertilisation (dpf)] produced pitch angles up to 15 deg with respect to the horizontal plane, roll angles up to 30 deg and a considerable vertical speed, demonstrating the necessity of 3D tracking (Voesenek et al., 2016). Also in 3D, kinematics are generally quantified as the movement and lateral curvature of the body centre line, 3D body orientation, and the displacement of the CoM.
The CoM of the fish is important to determine because it is the point that the resultant fluid-dynamic forces and torques act upon (Fig. 3A,C; Van Leeuwen et al., 2015b; Voesenek et al., 2016). The CoM depends on the mass distribution of the fish at every point in time, and it changes with deformation of the fish (Tytell and Lauder, 2008; Van Leeuwen et al., 2015b). The position of the CoM along the body axis for a straight fish is often used to define a body-attached point that can be tracked to estimate the CoM movement during swimming. This might be a reasonable approximation for low-amplitude swimming motions (Xiong and Lauder, 2014), but for high-amplitude motions as found in swimming larvae, the difference with the true CoM is large (Fig. 3A,B; Van Leeuwen et al., 2015b). Hence, for high-amplitude larval swimming, more sophisticated CoM estimation methods are required, such as methods based on a 3D model of the deforming body.
Fish locomotion has been divided into cyclic and acyclic swimming. In cyclic swimming, the kinematics repeat themselves and the cycle-averaged speed is constant. In reality, however, variations between the swimming cycles always occur. Acyclic swimming constitutes a large part of natural swimming motion: turns, escape manoeuvres, feeding strikes and burst-and-coast swimming. Many fish switch from (approximately) cyclic swimming to burst-and-coast swimming early in development (Weihs, 1979; Müller and Van Leeuwen, 2004). Much of the work on the fluid mechanics of fish swimming has focused on (near-)cyclic swimming.
During near-cyclic swimming, many teleost larvae employ an anguilliform swimming style (see Glossary), where the majority of the body makes considerable lateral excursions. An example of this motion is shown in Fig. 3A (Van Leeuwen et al., 2015b), which depicts the kinematics of a 5-dpf zebrafish larva swimming at a speed of approximately 50 body lengths s−1. Compared with adults, the larva shows high-amplitude motion of the whole body (peak-to-peak tail-beat amplitude A≈0.44 l at the tail) at a high frequency (∼85 Hz). This anguilliform swimming mode is relatively rare in most fish species at l>10 mm – larvae often change to a more tail-heavy amplitude distribution later in development. Fig. 3D (Osse and Van den Boogaart, 2000) shows the amplitude envelope of the deformation angle between successive ‘virtual body segments’ for a just-hatched carp larva (4.8 mm) and a larger larva (8.1 mm). The just-hatched larva bends strongly along a large part of the body, whereas the older larva confines large amplitudes to the tail.
Fluid dynamics
Analyses of the hydrodynamic forces on the fish are important for understanding swimming. The flow field surrounding the fish creates time-dependent pressure and shear-stress distributions on the skin. When integrated over the body, these distributions provide a resultant force and torque, resulting in linear and angular accelerations. It is common to divide the resultant force into thrust and drag, where thrust propels the fish, whereas drag opposes its motion. In engineering, drag is defined in the direction of the oncoming flow, and thrust is opposed to it (Anderson, 2001). In many engineering cases, the propulsive system is clearly separate from the body, so drag can easily be distinguished from thrust: drag acts on the body and thrust is produced by the propulsive system. However, for larval fish that undulate their whole body, this distinction is difficult to make (Schultz and Webb, 2002). A large part of the body surface contributes to both forward and backward forces, depending on the phase in the swimming cycle (Fig. 4A,B; Li et al., 2016). Almost no part of the body uniquely contributes to thrust or drag over a complete tail beat cycle, except the head, which almost exclusively experiences drag. Efforts were made to define drag and thrust on an undulating body, for example by separating friction forces from inertia forces (Chen et al., 2011), by estimating thrust from the body motion with a fluid-dynamic model (Webb et al., 1984) or by separating forward- and backward-acting forces (Fig. 4D–F; Li et al., 2012). The latter approach gives the most robust definition of thrust and drag, but is not generally applicable to measurements on swimming fish because it requires quantitative estimates of fluctuating force distributions along the body.
Many approaches have been used to measure, estimate or calculate the hydrodynamic forces. With an inverse-dynamics approach, resultant forces and torques on the body have been calculated from swimming kinematics of larval zebrafish (2D: Fig. 3C; Van Leeuwen et al., 2015b; 3D: Voesenek et al., 2016). Particle image velocimetry (PIV; see Glossary) techniques have been used to quantify flow fields around swimming fish larvae (e.g. Müller et al., 2008), allowing the estimation of resultant hydrodynamic forces (Unal et al., 1997; Drucker and Lauder, 1999; Dabiri, 2005). In addition, velocity fields obtained with PIV have been used to estimate pressure fields in a horizontal plane around swimming fish (Dabiri et al., 2013). From the velocity gradient near the body, the shear-stress distribution can be calculated. Therefore, in principle, it is possible to calculate the force distribution on the skin from a velocity field around the fish. In practice, it is difficult to quantify this near-body velocity field with PIV [or with particle tracking velocimetry (PTV; see Glossary)]. Because the flow field around a swimming fish is fundamentally 3D (e.g. Fig. 4), 3D PIV/PTV techniques (e.g. Elsinga et al., 2006) are required. These techniques are expensive and still have a relatively low spatial resolution, leading to inaccurate estimations of pressure and shear-stress distributions on the skin. This makes it difficult to obtain reliable force distributions from PIV or PTV.
Force distributions on the fish have been calculated using fluid-dynamic models. In the inertial flow regime, Lighthill's elongated body theory (Lighthill, 1960, 1971) has been used extensively. However, this model is not applicable to the intermediate flow regime because it models only inertial forces and ignores friction (Borazjani and Sotiropoulos, 2009). Simplified fluid-dynamic models have been proposed (Jordan, 1996; Chen et al., 2011) where the force on every segment of the body is calculated based only on the motion of that segment. However, this does not take into account spatial and temporal interactions between segments. Especially for large-amplitude body motion, these assumptions might not hold (Van Leeuwen et al., 2015b). More advanced models have been applied by, for example, Eloy (2013), who combined different empirical models to achieve more accurate fluid-dynamic forces. Finally, the full Navier–Stokes equations describing fluid dynamics have been approximated numerically using computational fluid dynamics (CFD) techniques for swimming animals, for example tadpoles (Liu et al., 1997), a modelled eel-like swimmer (Kern and Koumoutsakos, 2006) and zebrafish larvae (Li et al., 2012). This approach has the advantage of capturing the complete fluid dynamics, and may provide accurate force distributions on the skin in the intermediate flow regime. In the inertial flow regime, where turbulence may be important, large-scale differences exist within the flow – from the smallest turbulent vortices to the much larger wake vortices – which makes accurate numerical flow computations challenging with the current technology. In contrast, the scale differences are much smaller in the intermediate flow regime, allowing all scales of the flow to be resolved at achievable computational cost. The calculated flow fields can be validated with flow measurements, for example with planar PIV (Li et al., 2012). We expect that, in the future, a combination of measured kinematics, flow fields and validated CFD will allow accurate estimation of force distributions for arbitrary 3D motion.
Such a CFD approach can help us to answer why small fish larvae show high body curvatures along a large range of the body. For fish swimming in the intermediate flow regime, the relatively high viscous forces result in three negative effects on swimming performance: (1) relatively high skin friction results in a relatively high body drag (Fig. 4; Li et al., 2012), (2) thrust is more costly to produce (Najafi and Golestanian, 2004), and (3) the increased amplitudes of the body undulations, necessary to compensate for the relatively high body drag, themselves further increase drag (Van Leeuwen et al., 2015b). Fig. 4D–F shows the contribution of pressure and shear (friction) forces to the thrust and drag for a modelled zebrafish larvae swimming at different Re, calculated using CFD (Li et al., 2016). The shear forces contribute almost exclusively to drag (Fig. 4E), and their relative importance increases with decreasing Re. For the lowest Re values (<100), a particularly high contribution to friction drag is present in the posterior region, where relatively strong velocity gradients occur near the skin. Most likely to compensate for the strong friction effects upon drag, the larval fish generates thrust by producing high-amplitude, high-frequency body motions (Verhagen, 2004; Müller and Van Leeuwen, 2004; Van Leeuwen et al., 2015b). This results in a pressure difference across the undulating body (Fig. 4D; Li et al., 2016), with large contributions of dorsal- and ventral-edge vortices created at the sharp edges of the finfold (Fig. 4C). The highest contribution to thrust is present in the posterior region.
An intriguing experiment with adult African lungfish (Protopterus annectens; l=510–590 mm, two orders larger than larval fish) demonstrated the importance of the Re regime for drag and thrust production (Horner and Jayne, 2008). The viscosity of the surrounding fluid was increased up to three orders of magnitude by adding a polymer to the water, pushing the Reynolds number of the swimming adult fish into the intermediate flow regime. The lungfish swam with increased muscle activity and body curvature in the mid and anterior regions of its trunk, with bending amplitudes (relative to l) approximating those of fish larvae swimming in plain water. The higher drag at a given swimming speed in the more viscous regime presumably required an increased bending effort to generate a similarly higher thrust – the adult lungfish seem to deal with the increased viscous forces similarly to the much smaller larvae. Note that the tail beat frequency did not reach values similar to larval fish because the much larger body inertia of the lungfish presumably prevented this.
where f is tail beat frequency and A is peak-to-peak tail amplitude. The Strouhal number gives an indication of the wake topology; assuming that vortices are shed at the extremes of the lateral tail motion, they are laterally spaced at a distance A and longitudinally at a distance (Fig. 5A). The Strouhal number of a swimming fish also defines the ratio between oscillatory flow velocities induced by the beating tail (that scale with fA) and translatory flow velocities (associated with ). Drag on an animal scales approximately with , whereas thrust scales approximately with (fA)2. A poorly streamlined animal generates relatively high body drag at a given and, thus, to swim periodically, it needs to generate an equally high thrust force, which is achieved by increasing fA. For this reason, poorly streamlined animals need to swim at a relatively high St to produce enough thrust to counter drag, such as crocodiles swimming at St=0.78 (Eloy, 2012, based on data of Seebacher et al., 2003). For a similar reason, animals that are ‘streamlined’ but operate at low Re need also to swim at high St (e.g. the lungfish described above) because the relatively strong viscous effects similarly result in increased body drag, which consequently requires an equal increase in thrust production. Owing to this dependency on the friction forces, St varies with Re in the intermediate flow regime (Fig. 5A; Kayan et al., 1978; Borazjani and Sotiropoulos, 2009; Van Leeuwen et al., 2015b).
Energetics
Energy efficiency is important for fish in general, and especially for larvae. Young larvae have a limited amount of energy in their yolk and are not yet able to feed. Because the ‘primary goal’ of the larva is to reach the reproductive adult stage and produce offspring, they need to use as much of this yolk for growth and development as possible. Because swimming activity can contribute up to 80% of the total metabolism [for larval cod (Ruzicka and Gallager, 2006)], saving energy on locomotion can have a large impact on the total energy budget. Therefore, it is useful to define a measure of swimming energetics for comparison between species and between developmental stages.
Based on the efficiency of thrust production of an oscillating foil in the inertial flow regime, Triantafyllou and colleagues (1993) proposed that optimal efficiency is achieved for St values of 0.25–0.35, where the vortices shed by the fish are optimally reused for thrust production. For the inertial regime, most examined flying and swimming animals have been found to operate in an St range of 0.2–0.4 (Taylor et al., 2003). In contrast, within the intermediate regime, animals tend to operate at higher St than the optimal range for inertia-dominated flows (Fig. 5A; Eloy, 2012; Van Leeuwen et al., 2015b). To produce sufficient thrust to overcome the relatively high (viscous) drag at a given swimming speed (see Fluid dynamics section, above), animals swimming in the intermediate Re regime may need to operate at relatively high St. Further research is required to elucidate the link between St value and energy use for the intermediate flow regime.
where and are the cycle-averaged input and output power, respectively. The output power consists of the product of cycle-averaged swimming speed () and magnitude of thrust () or drag (), which are equal during cyclic swimming. However, as mentioned above, unambiguously separating drag and thrust requires extensive computational effort, which is not feasible in many cases. But, most importantly, η does not relate to absolute power consumption, a quantity crucial to the fish. To illustrate, consider a high-drag fish and a low-drag fish swimming at the same speed with identical η. The high-drag fish has a higher output power () than the low-drag fish, and therefore requires a higher input power, despite having the same η. In agreement with Schultz and Webb (2002), these reasons make Froude efficiency unsuitable as a measure of energetics for whole-body swimmers such as fish larvae.
where Einput is input energy required for locomotion, d is covered distance and m is the mass of the fish. The CoT is directly relevant to the energetics of the animal – minimising CoT at a particular swimming speed is identical to minimising power (and therefore energy) consumption. Furthermore, determining CoT is not burdened by the difficulties associated with separating thrust and drag. The CoT is relevant for cruising fish, swimming either (approximately) cyclically or by burst-and-coast. It is less suitable for motions where maximum acceleration and short response times are paramount, such as fast starts. Here, an efficiency-like quantity could be used, taking for example the ratio of the final kinetic energy to the total invested energy.
To calculate CoT, multiple definitions of the input power are possible, either derived only from the fluid and body dynamics or, better, taking into account all sources of increased energy expenditure due to locomotion, including for example muscles and circulation. The first, which ignores the conversion losses of metabolic energy into muscle work, can be calculated from CFD results (e.g. Li et al., 2012), whereas the latter can be determined from, for example, respiration flow-tunnel experiments (e.g. Madan Mohan Rao, 1971; Palstra et al., 2008). These experiments are, however, challenging for small larval fish because they tend to swim in the (low speed) boundary layer or even adhere to the bottom. Therefore, to measure the swimming speed in a flow tunnel accurately, the flow profile of the tunnel and the position of the larva within it need to be quantified. Note that the locomotion-related energy consumption should be extracted from the respirometry-derived total energy consumption by correcting for the basal metabolic rate.
The body and fluid-dynamic components of the CoT give insight into the energy expended into the flow, but the quantity directly relevant to the fish is the muscle input power – the power that is actually consumed for swimming. Because the muscle efficiency depends on shortening rate and frequency (Curtin and Woledge, 1993), which in turn depend on the motion of the fish, optimal swimming for minimal muscle power presumably needs to compromise between efficient fluid dynamics and optimal muscle shortening rates. Therefore, the optimal swimming motion that minimises fluid-dynamic power will in general not minimise muscle power. Hence, depending on the type of analysis, care should be taken to clearly define the CoT.
Li et al. (2012) studied the effect of swimming speed on (body and fluid-dynamic) power consumption for a simplified model of a zebrafish by varying curvature amplitude. This showed that CoT increases with swimming speed, presumably caused by an increase in drag. Fig. 5B shows the swimming speed and (body and fluid-dynamic) CoT for a similar model larva swimming at different viscosities with identical body-curvature fluctuations (Li et al., 2016). Owing to a reduction in viscous forces at a higher Re, thrust and drag are balanced at a higher swimming speed. Despite this higher speed, CoT is lower at a higher Re: the hydrodynamic regime influences CoT strongly.
Fish larvae can actively change their CoT by selecting the speed at which they swim: a lower speed tends to result in a lower CoT (Li et al., 2012). However, constraints often exist on the time spent to cover a distance. The larva needs to compromise between energy consumption and travel time. For example, for a foraging larva, the amount of consumed food tends to increase with the average swimming speed, as does the CoT (i.e. power consumption). In this case, the optimal swimming speed might be the one that leads to the highest net energy gain (energy gained from the food minus the costs for catching and processing), balancing between food intake and energy spent on locomotion (Ware, 1975).
Muscles
Fish larvae power swimming with their axial muscle system. The varying demands on the muscular system throughout development require continuous molecular changes and spatial rearrangement of muscle fibres, as well as changes in the neural pattern generators that orchestrate the spatiotemporal muscle activation. Given the size and scope of this Review, we do not intend to provide a broad overview of the regulation of muscle development and the molecular changes that occur during the larval phase. Instead, we highlight selected biomechanical challenges that fish larvae need to cope with and point at evolved solutions.
The trunk muscles in bony fish are arranged in two rostrocaudal series of myomeres, one at each side of the body, that power the lateral bending of the body during swimming (Fig. 6A). It is advantageous if all muscle fibres in the myomeres can usefully contribute to the mechanical work required to bend the body, and thus power swimming (Alexander, 1969; Van Leeuwen et al., 2008). To achieve this, active muscle fibres need to contract at similar strains, which depend on their lateral position and orientation. Van Leeuwen and colleagues (2008) showed that, in zebrafish, the internal arrangement of the muscle fibres changes over development – they initially have an approximately longitudinal orientation and rearrange over ontogeny to form near-helical muscle-fibre trajectories (Fig. 6B). Van Leeuwen et al. (2008) suggested that the fibre reorientation results in reduced variation of the longitudinal muscle-fibre strain over the muscle volume, allowing all muscle fibres to contribute effectively to work production. Although it is still unclear by which mechanism the muscle fibres rearrange, it was shown that larvae that cannot activate their trunk muscles undergo a much-reduced reorientation (Van der Meulen et al., 2005). This suggests that the muscle-fibre forces and the deformation of the trunk are essential for the muscle-fibre rearrangement.
Small fish larvae reach relatively high swimming speeds by beating their tails at high frequencies with large amplitude. Within hours after hatching at 2 dpf, larval zebrafish can swim with tail beat frequencies of ∼80 Hz, and 1 or 2 days later even at 90–100 Hz (Müller and Van Leeuwen, 2004; Van Leeuwen et al., 2015b), allowing them to reach swimming speeds of ∼65 body lengths s−1. To generate these fast motions, the muscle system needs to produce high strain rates, and activate and deactivate at a high frequency. To meet these requirements, bony fish larvae have evolved ‘specialised’ very fast larval (embryonic) muscle-fibre types that are distinct from the slow (red), intermediate and fast (white) fibres found in juvenile and adult zebrafish (Buss and Drapeau, 2000). What makes these larval muscle fibres so very fast? They are short [<200 µm in 7 dpf carp larvae (Alami-Durante et al., 1997)], leading to small activation delays along the fibre. High-frequency contractions require fast release and uptake of Ca2+ from the sarcoplasmic reticulum (SR). This is made possible by a relatively large membrane surface of the SR and by short diffusion distances within myofibrils with a comparatively small diameter [∼0.3 µm in larval herring (Vieira and Johnston, 1992); ∼1–1.2 µm in adult saithe (Patterson and Goldspink, 1976)]. Furthermore, different isotypes of the Ca2+-binding protein parvalbumin are expressed over development (Focant et al., 1992; Huriaux et al., 1996), suggesting specific adaptations to the demands on fast Ca2+ release and uptake. In addition, fish larvae have distinct isoforms of myosin heavy chain and myosin light chain proteins compared with those of juveniles and adults (Scapolo et al., 1988; Crockford and Johnston, 1993; Huriaux et al., 1999; Veggetti et al., 1993), which is suggested to correspond to the extreme demands in larvae. Early fish larvae have been observed to have high mitochondrial densities in the muscle (Vieira and Johnston, 1992; Brooks et al., 1995). This, together with the short diffusion distances, suggests that small larvae always swim almost entirely aerobically with their very fast muscle (El-Fiky et al., 1987; Wieser, 1995). As the larvae grow, tail beat frequencies are decreased owing to the increasing body inertia. At this stage, slower muscle-fibre types appear, suitable for cruising aerobically with higher efficiency than the very fast muscles (Mascarello et al., 1995).
The muscle system needs specific activation patterns to perform effective swimming motion. Muscle activation patterns during swimming are often measured with electromyography (EMG) in adult fish (e.g. Blight, 1976; Van Leeuwen et al., 1990; Horner and Jayne, 2008). For smaller larval fish, this technique is difficult without strongly disrupting swimming behaviour. Muscle activation patterns were measured in so-called fictive swimming, where a paralysed fish is stimulated to swim and an EMG signal is recorded at the muscles (Buss and Drapeau, 2002). These investigations showed that muscle activation patterns in larval zebrafish are similar to those of the adult fish, with alternating left–right activation of the muscle with a rostrocaudal delay. More recently, a method was proposed to measure muscle activity on a fixed, but non-anaesthetised, zebrafish larva (Cho et al., 2015). However, as far as we are aware, no muscle-activation-pattern measurements have been performed on free-swimming larval fish, limiting our knowledge on the locomotory control in fish larvae.
To drive the very fast muscle system, the neural motor system should be up to the task of generating very fast activation patterns. The motoneurons in the spinal cord of the larval zebrafish that innervate the muscles are arranged in left and right dorsoventral columns (McLean et al., 2007; Fetcho and McLean, 2010). The fastest primary motoneurons lie dorsally and activate high-power, high-frequency motions, whereas the slowest motoneurons lie ventrally and activate finely controlled low-frequency motions. The fastest motoneurons develop first; the slowest motoneurons develop last. Thus, the functionally different motoneurons are spatially segregated and their appearance is shifted in time. McLean and colleagues (2007) suggested that the activation of the motoneurons takes place according to the size principle (Henneman et al., 1965) – the dorsal motoneurons are larger than the ventral ones and more difficult to recruit. In the hindbrain, very large so-called Mauthner (and homologous) neurons are already present in just-hatched larvae. Their axons run along the entire spinal cord and innervate motoneurons. These neurons drive the fast starts by initiating an almost instantaneous activation along one side of the trunk (see Escaping predators section, below). The early presence of the Mauthner neurons and their homologues, and the fastest motoneurons, support fast high-frequency motions from the day of hatching in the larval zebrafish, but fine control is still lacking owing to the absence of functional slower motoneurons, which are still developing. This results in fast but ‘visually chaotic’ swimming motions of 2-dpf larvae, which seem hard to predict and might still be effective for predator avoidance. Later in development, the response to threats becomes more refined (see also Escaping predators section, below).
Cruising and dispersal
An obvious reason to swim is to cover distance for migration and dispersal: many fish larvae disperse early in development, travelling long distances (e.g. Sancho et al., 1997; Dudley et al., 2000). For late-stage reef-fish larvae, active swimming might affect dispersion at a magnitude comparable to that of oceanic currents (Fisher, 2005; Huebert and Sponaugle, 2009). These late-stage larvae are relatively large (15–30 mm) and swim at relatively high speeds [∼0.2–0.6 m s−1, ∼10–20 body lengths s−1 (Fisher, 2005)], and so their Re values (3300–20,000) are well within the inertial regime. The resulting low CoT allows them to disperse over longer distances, and their relatively high swimming speed allows them to achieve this within a suitable time window. Even larvae of non-migrating species often need to cruise. Larvae foraging in habitats of low food abundance need to swim relatively long distances to find prey. In addition, in the presence of a prevailing current, larvae need to swim for prolonged periods to remain in their current habitat, unless they have an organ to attach themselves to the substrate (Able et al., 1984; Pottin et al., 2010).
Virtually all bony-fish larvae have a functional finfold when they hatch (Kendall et al., 1984). To what extent could such a finfold be useful for swimming in the intermediate flow regime? As explained above (see Fig. 4), fish larvae swimming in this regime need to produce high thrust to compensate for high drag. To this end, fish larvae adopt an anguilliform swimming style, with a large region along the body that curves substantially and produces thrust. Using CFD, Li and colleagues (2016) showed that production of thrust is enhanced by edge vortices emanating from a sharp edge, making a finfold surrounding a large part of the body an effective adaptation to increase thrust. Keeping the body-curvature fluctuations the same, they also computed that a removal of the finfold, except for the caudal fin, leads to a decrease in swimming speed and fluid-dynamic power input, but with almost the same fluid-dynamic CoT. Thus, compared with the finfold-less larval morph, the morph with finfold covers distance within a shorter time with the same fluid-dynamic costs. This might be advantageous during migration and searching for prey, if the higher power can be delivered with the muscular system. These findings might help to explain the omnipresence of the finfold in larval bony fish.
As the larvae grow, inertia becomes more important during swimming. The associated relative drag reduction allows many fish to shift towards a carangiform swimming mode (see Glossary) by reducing the relative curvature amplitude along their bodies (see Body kinematics section; Osse and Van den Boogaart, 2000). This change in swimming style correlates with development of a separate caudal fin in many species (Osse and Van den Boogaart, 1995). In some species, development of the caudal fin occurs before that of other unpaired fins, presumably because it has the largest contribution to thrust production [black rockfish (Omori et al., 1996), yellow-fin mullet (Kingsford and Tricklebank, 1991)].
Escaping predators
Predation is an important cause of mortality in fish larvae (Sogard, 1997). Hence, the chances of survival will increase with increasing ability to escape predators. Larval fish generally attempt to escape predators by performing a ‘C-start’, during which they curl their body into a C-shape, with little movement of the CoM (stage 1, or preparatory stroke), and then uncurl to generate high thrust, and therefore high accelerations of their CoM [stage 2, or propulsive stroke (Müller et al., 2008)]. This motion is often followed by a high-amplitude, high-frequency swimming bout (Müller and Van Leeuwen, 2004). Fig. 7A shows an example of a 3D kinematic analysis of a fast-starting zebrafish larva (data in Dataset 1), illustrating the strong body curvature at the end of the C-phase, the subsequent push-off phase with a rapid increase in CoM velocity, and the 3D nature of the motion. Initiation of the C-start requires fast unilateral activation of the axial muscles [e.g. for adult bluegill sunfish (Jayne and Lauder, 1993)]. Such manoeuvres require concerted actions of the complete locomotory system: the sensory-motor system needs to detect threats reliably, and initiate and control the escape; the muscular system should produce enough force and power at short activation times; and the external morphology needs to support effective hydrodynamic thrust production to maximise acceleration.
Producing high accelerations and velocities
During the preparatory stroke, zebrafish larvae produce a jet flow into the C-form (Fig. 7B; Li et al., 2014; Müller et al., 2008). The resulting pressure distribution on the body mainly produces a torque that rotates the larva (Li et al., 2012). In the following propulsive stroke, the jet is reoriented along the body (Fig. 7B), where the pressure distribution propels the fish forward and provides a torque that counteracts the angular velocity produced in the preparatory stroke. The relatively high thrust results in high accelerations; for zebrafish, up to 28 g (Müller and Van Leeuwen, 2004). CFD simulations indicate that the typical motions of a C-start in larval fish tend to maximise escape distance (Gazzola et al., 2012). After the propulsive phase, larvae use large-amplitude high-frequency motion, up to ∼100 Hz [zebrafish (Müller and Van Leeuwen, 2004; Van Leeuwen et al., 2015b)]. Larval fish increase their fast-start performance over development, decreasing the time spent performing a start and increasing the distance within that time, which is suggested to be associated with an increase in Re [Chinook salmon (Hale, 1996)].
The high-frequency body undulations require the muscle system to operate at the same high frequencies and produce relatively high forces and power within a short time (<5 ms) to push off against the water with the tail. These short high-amplitude contractions lead to high strain rates, and put high demands on the activation and deactivation systems. This conflicts with the requirement to produce high force: superfast muscle required for high-frequency swimming tends to produce low tensile stresses at low efficiency (Rome et al., 1999). However, because the larvae are small, scaling works in their favour: the produced force is proportional to the muscle physiological cross-section, which scales with l2, whereas body mass is approximately proportional to the volume, which scales with l3. The favourable ratio of muscle cross-section to body inertia allows larvae to produce sufficient muscle force to power strong accelerations. Furthermore, fish larvae might employ an elastic mechanism to support swimming at high frequencies (Müller and Van Leeuwen, 2004). For example, larval carp have smaller, stiffer isoforms of titin than adults, suggested to contribute to an increased muscle and body stiffness and possibly elastic energy storage (Spierts, 2001). As fish larvae grow, the required hydrodynamic power for escaping increases but it is compensated by a decrease in the required muscle shortening velocity and an increase in muscle mass, leading to an increase in total muscle force and power [carp (Wakeling et al., 1999)].
Timing and controlling the escape
When attacked by a slow-moving predator, as is often the case for suction-feeding predators (Webb, 1984), fish larvae may reach higher speeds than the predator. In these cases, predator detection rather than locomotor performance has been suggested to be the most important determinant of escape success (Nair et al., 2017). Prey escape success in zebrafish larvae is highest when they respond at an intermediate distance (4–8 mm) from the predator (Fig. 7C; Stewart et al., 2013). Larger response distances allow the predator to adjust its intercept course, whereas smaller distances do not give the larvae enough time to escape. This places requirements on the sensing systems, to detect predators sufficiently early, and on the control of the escape, to perform an adequate response.
Flow sensing using the lateral line (see Glossary) plays an important role for predator detection (McHenry et al., 2009). Zebrafish larvae detect the approach of a predator by sensing pressure differences, and escape in the direction away from the fastest flow (Stewart et al., 2014). In Atlantic herring, late-stage larvae make more-sophisticated escape manoeuvres than younger larvae and undergo fewer false alarms (Fuiman, 1993), suggesting that they become better at performing a proportional and well-timed response, presumably owing to learning, and improved sensing and control capabilities.
Fish larvae also use visual cues to detect threats. Zebrafish larvae of 5–6 dpf respond to a growing dark spot (i.e. a looming stimulus) by performing an escape manoeuvre after it has reached a critical size on the retina, suggesting relatively advanced visual processing early in development (Dunn et al., 2016). Herring larvae only show responses to looming stimuli late in development (at 25 mm body length), whereas early larvae do respond to flashing stimuli, indicating that visual processing power increases over development (Batty, 1989). Compared with sound or touch, visual responses result in more escape trajectories directed away from the stimulus. Hence, it is likely that improvements in the sensory systems allow older fish larvae to escape predators more effectively.
Fast reaction times place requirements on the neural control of escape manoeuvres and sensors to detect approaching predators. The fast-start response to stimuli is controlled mainly by the Mauthner neurons and their homologues (Wilson, 1959; Foreman and Eaton, 1993). A group of three reticulospinal neurons – the Mauthner cell, MiD2cm and MiD3cm – initiates escape manoeuvres in zebrafish larvae: the Mauthner cell is involved in responding to tail-directed stimuli, whereas the two other neurons respond to head-directed stimuli (Liu and Fetcho, 1999). This system develops early in zebrafish: larvae show a strong swimming response to touch stimuli after 2 days of development (Eaton and Farley, 1973), allowing them to respond to threats immediately after hatching. The response time to visual stimuli is often much larger than that of acoustic stimuli, and delays in both decrease throughout development [red drum larvae (Fuiman et al., 1999)].
Following an optimal escape trajectory requires precise control of muscle activation patterns. In adult goldfish, the escape trajectory is controlled by the relative magnitude of ipsilateral and contralateral muscle contraction, and by the delay between them (Foreman and Eaton, 1993). Furthermore, fish larvae actively regulate the elevation angle of their fast starts, likely by separate activation of hypaxial and epaxial muscle [zebrafish (Nair et al., 2015)], and presumably also by using their medial and paired fins. During a strong C-start, an escaping larva can intercept its own wake, which causes a deflection of the escape path of more than 5 deg (Li et al., 2014). For precise control over the final heading of the escape trajectory, this should be taken into account by the neural control system.
Hunting and feeding
The vast majority of hatched fish larvae die before they reach the juvenile stage, often owing to starvation (Hjort, 1914; Houde, 2002). As soon as larvae exhaust their yolk, they need to hunt prey to meet their energy requirements. Limited energy supply arising from ineffective feeding can cause starvation; in a less extreme case, it can limit the growth rate of the larva (Lee et al., 2010). The resulting smaller size might negatively affect survival owing to increased predation of smaller larvae (Peterson and Wroblewski, 1984). To gather the required food, nearly all teleost fish larvae are pelagic suction feeders preying on zooplankton after they exhaust their yolk sac (Hunter, 1980; Drost, 1987). Suction feeding places requirements on the developing fish: it needs to be able to detect prey, approach it while aiming the mouth, create an accurately timed suction flow, and subsequently swallow and digest the prey (Osse, 1989). The hydrodynamics of suction feeding depends on the Reynolds number. Feeding under relatively viscous conditions generally seems less successful because the prey can more easily escape the suction, requiring smaller forces than in a less viscous flow regime (China and Holzman, 2014). For this reason, larger fish can catch more prey and hence survive longer.
The locomotory system supports suction feeding by allowing the fish to control and time its prey approach for effective capture (Van Leeuwen, 1984). During undulatory swimming, the head oscillates with respect to the path of the CoM (Van Leeuwen et al., 2015b). This makes a precise approach of the feeding apparatus towards the prey difficult, especially without creating large flow disturbances that might be sensed by the prey. The fish require specific adaptations to achieve this, either another means of propulsion (e.g. pectoral fins) or specific control patterns that limit head motion and hydrodynamic disturbances [e.g. a J-turn (Bianco et al., 2011)].
Pectoral fin movement to brake and manoeuvre during suction feeding has been observed in adult (Higham, 2007) and juvenile (Lankheet et al., 2016) fish. Pectoral fins have been suggested to play a respiratory function in larval zebrafish, rather than a locomotory one (Green et al., 2011; Hale, 2014), because genetic elimination of the pectoral fins did not seem to influence slow-swimming performance. However, during feeding, they might play an important role in aligning the head through control of the pitch and yaw angles, as well as contributing to forward acceleration and deceleration. Fig. 8A depicts a carp larvae performing a feeding strike (Drost, 1987). It beats the pectoral fins to approach the prey, adducts them against the body and then brakes by flapping them forward. Zebrafish larvae beat their pectoral fins to align themselves before a strike, perform an S-start to accelerate and finally brake using forward motion of the pectoral fins (Fig. 8B). The S-start produces much lower yaw angles of the head than the C-start, allowing for an accurate alignment of the head.
Newborn juvenile guppies (Girardinus metallicus) have a partly ‘innate’ feeding behaviour, but more advanced eye–fin coordination develops rapidly after birth (Lankheet et al., 2016). Early zebrafish larvae (6–8 dpf) have been suggested to have fine motor control during feeding, showing complex bend-to-bend variation in timing and rostrocaudal location of bending (Borla et al., 2002). Prey tracking in zebrafish larvae is visually guided (McElligott and O'Malley, 2005). Because the eye becomes functional only after hatching (which occurs at 2 dpf) [zebrafish (Glass and Dahm, 2004)], rapid development of the visual processing system is required before the first feeding at approximately 5 dpf.
Perspectives
Much work on the swimming of fish has been performed under the assumption of periodic motion, although the majority of swimming behaviour of most (larval) fish is aperiodic. With the exception of fast starts, aperiodic motion has been studied much less. Furthermore, owing to technical limitations, much of the analyses have been done in a single plane, even though swimming motion is often highly 3D. Many open questions remain on the kinematics, fluid dynamics and control of complex 3D manoeuvres often performed by the fish during escape or hunting.
Whereas the fluid dynamics of wakes behind swimming fish has received considerable attention, both experimentally and numerically, the resulting force distributions on the skin have not. As demonstrated with dedicated CFD solvers (e.g. Li et al., 2016 – see Fluid dynamics section), the fluid dynamics of swimming in the intermediate flow regime and the resulting force distributions can be well modelled using CFD techniques, because the lack of turbulence allows all relevant scales of the flow to be resolved accurately. The advent of open-source fluid-dynamic solvers [e.g. OpenFOAM (Jasak et al., 2007)] make this possible at low cost with comparatively limited programming effort. There are interesting opportunities to numerically investigate force, torque and power production, and 3D manoeuvring, and how these correlate with shifts in the fluid-dynamic regime.
The development and restructuring of the axial muscle of larvae have been investigated in previous studies, but research on the physiological properties and activation patterns of the larval muscle system is relatively limited. Larval fish have adapted to the required high-frequency contractions with specific larval muscle-fibre types, possessing unique properties. Research on these properties could uncover how larval muscle can generate sufficient force at such high frequencies. Furthermore, although many studies have measured muscle activation patterns of swimming adult fish, little is known about these patterns in free-swimming larval fish. These measurements might answer how larvae produce swimming motions with their muscles, how this changes over development and whether muscle control is innate or learned. Owing to the small size of the larvae, both muscle-property and muscle-activation measurements are challenging and will require novel methodologies.
Many studies have addressed different aspects of the biomechanics of larval swimming separately. However, swimming motion is created by a complex interaction between the different components; to understand the system as a whole, the components need to be studied integratively. By combining models and measurements of different systems of the fish, including the neuromuscular system, passive tissues and the fluid dynamics, an in silico integrative neuromechanical model of the fish larva can be developed. Although a daunting task, such an approach will allow investigators to study the effect of the variation of a large range of parameters on swimming performance in an unprecedented way, and might therefore answer numerous questions on the locomotory system of larval fish throughout their development.
Acknowledgements
We thank two anonymous reviewers for their insightful comments on the manuscript. We benefited from a longstanding collaboration with U. K. Müller, G. Li, and H. Liu.
Footnotes
Funding
This work was supported by grants from the Netherlands Organization for Scientific Research (Nederlandse Organisatie voor Wetenschappelijk Onderzoek; NWO/ALW-824-15-001 to J.L.v.L. and NWO/VENI-863-14-007 to F.T.M.).
References
Competing interests
The authors declare no competing or financial interests.